Engineered for demanding industrial environments, this M20 x 144mm Nylon Hex Head Cap Screw offers superior corrosion resistance and dielectric properties. Its robust design ensures reliable fastening in diverse applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M20 |
| Length | 144mm |
| Head Width | 32mm |
A proven choice for industrial professionals, this M20 x 144mm Hex Head Cap Screw is constructed from high-performance Nylon. This material provides excellent resistance to chemicals, moisture, and UV degradation, making it ideal for corrosive or electrically sensitive environments. The M20 thread size ensures substantial load-bearing capacity, while the 144mm length offers significant engagement. The nominal 32mm head width provides ample surface area for torque application with standard tooling, allowing for secure and reliable assembly in a wide range of industrial equipment and structural applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a threaded M20 internal thread. 2. Insert the Hex Head Cap Screw through the components to be joined. 3. Tighten the screw using a standard 32mm hex wrench or socket, applying appropriate torque to achieve secure fastening without over-stressing the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M20 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M20 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or material deformation. | Apply torque gradually and use a torque wrench if precise control is required. Consult material datasheets for recommended torque values. |
| Using the screw in applications exceeding its temperature or load-bearing limits. | Verify that the operating environment and load requirements are within the specified capabilities of Nylon fasteners. Refer to material specifications for temperature and tensile strength. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Corrosive chemical processing equipment, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||