This M20 x 132mm Hex Head Cap Screw, crafted from robust Nylon, offers exceptional strength-to-weight ratio and superior resistance to chemicals and corrosion, making it ideal for specialized industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M20 |
| Length | 132mm |
| Head Width | 34mm |
Built to exacting engineering tolerances, this M20 x 132mm Nylon Hex Head Cap Screw features a nominal diameter of 20mm and a total length of 132mm. The hex head presents a controlled clamping surface with a measured width of 34mm, ensuring secure engagement with standard hex drivers. Manufactured from high-grade nylon, it exhibits excellent dielectric properties, low friction, and resistance to a wide range of solvents and acids, making it suitable for applications where metal corrosion is a concern or electrical insulation is required. Its inherent toughness and resistance to vibration contribute to reliable, long-term performance in demanding operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threaded hole is clean and free of debris. 2. Align the M20 Nylon Hex Head Cap Screw with the threaded hole. 3. Engage a suitable hex driver and tighten progressively to the required torque, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M20 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M20 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to stripping of nylon threads. | Employ a calibrated torque wrench and tighten only to the specified torque value for nylon fasteners, typically lower than metal equivalents. |
| Exposing the nylon screw to temperatures exceeding its operational limit. | Verify the ambient and operational temperatures against the nylon material's thermal specifications to prevent degradation or softening. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical insulation systems, Corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||