This M19x95mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and lightweight properties. Its robust nylon construction ensures reliable fastening in diverse industrial and commercial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M19 |
| Length | 95mm |
| Head Width | 27mm |
Manufactured under strict quality controls, this M19x95mm Nylon Hex Head Cap Screw features a nominal diameter of M19, a length of 95mm, and a head width of 27mm. Constructed from high-strength, chemically inert nylon, it provides excellent insulation properties and resistance to a wide range of acids, bases, and solvents. Its non-conductive nature makes it ideal for electrical applications where preventing shorts is critical. The material's inherent flexibility also absorbs vibration, reducing the risk of loosening in dynamic systems. This fastener is designed for use in environments prone to corrosion or where weight reduction is a significant design consideration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the cap screw into the receiving hole to engage threads. 3. Tighten the cap screw using an appropriate metric wrench or socket to the specified torque, avoiding over-tightening. 4. Verify proper engagement and secure fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip threads or crack the head. | Use a torque wrench and adhere to recommended torque values for nylon fasteners or tighten until snug and then an additional 1/4 turn. |
| Using the wrong size tool, leading to damage of the hex head. | Always use a correctly sized metric socket or wrench that fits the 27mm head width precisely. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and component mounting, Chemical processing equipment, Corrosive environment assemblies, Lightweight structural components, Marine and outdoor applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||