Engineered for reliability, this M19x72mm Nylon Hex Head Cap Screw provides superior corrosion resistance and non-conductive properties, ideal for environments where traditional metal fasteners fail.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M19 |
| Length | 72mm |
| Head Width | 33mm |
Trusted by engineers across multiple sectors, this M19x72mm Nylon Hex Head Cap Screw, featuring a 33mm head width, is manufactured from high-performance nylon. This material offers exceptional dielectric strength, making it suitable for electrical applications, and inherent resistance to a wide range of chemicals and moisture, preventing galvanic corrosion. Its robust design ensures secure fastening in applications requiring non-magnetic properties and a lightweight solution. The precise dimensions guarantee compatibility with standard tooling and mating components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Thread the M19x72mm Nylon Hex Head Cap Screw into the corresponding tapped hole or nut, applying consistent torque. 3. Verify that the screw is fully seated and secure, but avoid over-tightening to prevent stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can lead to thread stripping or material cracking. | Use a torque wrench set to the manufacturer's recommended limit for nylon fasteners or apply moderate hand pressure until snug and secure. |
| Using the nylon screw in applications exceeding its temperature or load-bearing limits. | Consult the nylon material datasheet for temperature and tensile strength specifications to ensure suitability for the intended application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Chemical processing equipment, Corrosive environments (marine, industrial).
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||