Engineered for extreme performance, this M19x33mm Hex Head Cap Screw is crafted from high-strength Titanium Grade 5. It offers exceptional corrosion resistance and a superior strength-to-weight ratio for critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M19 |
| Length | 33mm |
| Head Width | 14mm |
Specified by design engineers worldwide, this Hex Head Cap Screw adheres to stringent performance requirements. Constructed from Titanium Grade 5 (Ti-6Al-4V), it boasts an impressive combination of high tensile strength (approx. 950 MPa) and excellent fatigue resistance, coupled with remarkable immunity to corrosion in diverse environments. The M19 nominal diameter, 33mm length, and a 14mm head width ensure precise fitment and efficient torque transfer in critical assemblies. This material is commonly chosen for applications demanding lightweight yet robust fastening solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply a small amount of anti-seize compound to the threads for easier assembly and disassembly, especially in corrosive environments. 3. Tighten the screw to the specified torque value using a calibrated torque wrench, ensuring proper seating of the hex head.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the screw, potentially leading to thread stripping or material fatigue. | Always consult material datasheets or design specifications for the correct torque value and use a calibrated torque wrench for precise application. |
| Using incompatible tools or fasteners that can damage the hex head or compromise the connection. | Utilize high-quality, correctly sized hex drivers and ensure the mating component is designed for Titanium Grade 5 fasteners. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||