Engineered for superior corrosion resistance and aesthetic appeal, this M19x32mm brass hex head cap screw offers reliable fastening in demanding environments. Its warm metallic luster complements decorative installations.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M19 |
| Length | 32mm |
| Head Width | 9mm |
Manufactured under strict quality controls, this M19x32mm brass hex head cap screw features a nominal diameter of 19mm and a length of 32mm. The head width measures 9mm, providing ample surface area for torque application. Constructed from high-grade brass (typically UNS C36000 or equivalent), it exhibits excellent ductility, malleability, and inherent resistance to corrosion, particularly in saline or humid conditions. This material also offers good electrical conductivity and non-sparking properties, making it suitable for various industrial and decorative applications where both performance and appearance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool for the hex head (e.g., wrench or socket) ensuring a snug fit. 2. Insert the cap screw into the pre-drilled or tapped hole. 3. Apply controlled torque to secure the components, avoiding over-tightening which can damage the brass threads or workpiece.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening. | Apply torque gradually and use a torque wrench if precise tension is required to prevent stripping threads or deforming the brass. |
| Mismatched thread pitch for the application. | Verify the thread pitch of the brass cap screw against the mating component's thread pitch to ensure compatibility and secure fastening. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and enclosures, Architectural and decorative trim, Specialty machinery and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||