This M19x29mm Nylon Hex Head Cap Screw provides superior corrosion resistance and excellent dielectric properties. Engineered for reliable fastening in demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M19 |
| Length | 29mm |
| Head Width | 32mm |
Specified by design engineers worldwide, this M19x29mm Nylon Hex Head Cap Screw features a nominal diameter of M19, a shank length of 29mm, and a head width of 32mm. Constructed from high-performance nylon, it exhibits exceptional chemical resistance, a low coefficient of friction, and robust electrical insulation capabilities, making it suitable for applications in corrosive atmospheres, electrical assemblies, and where thermal insulation is critical. Its self-lubricating properties contribute to ease of assembly and reduced wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M19 internal thread. 2. Thread the Nylon Hex Head Cap Screw into the mating component by hand or with a suitable driver, ensuring proper alignment. 3. Tighten the screw to the required torque specification, avoiding over-tightening which could damage the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to stripping of threads or deformation of the head. | Use a torque wrench and adhere to recommended torque values for nylon fasteners to prevent damage. |
| Using a steel hex key or socket that can damage the nylon hex head. | Utilize nylon or plastic-coated tools to engage the hex head, preserving its integrity. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and component mounting, Chemical processing equipment, Automotive and aerospace assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||