Experience superior strength-to-weight ratio with this M19x25mm Hex Cap Screw, crafted from aerospace-grade Titanium Grade 5. Its exceptional corrosion resistance and high tensile strength make it ideal for critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M19 |
| Length | 25mm |
| Head Width | 19mm |
Engineered for reliability and performance, this M19x25mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its outstanding tensile strength (up to 950 MPa) and excellent fatigue resistance. The material's inherent biocompatibility and superior corrosion resistance in harsh environments, including saltwater and chemical exposure, make it a preferred choice for demanding sectors. The M19 nominal diameter, combined with a 25mm length and a 19mm head width, ensures precise fitment and secure fastening in critical assemblies where weight reduction and long-term structural integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant if specified for the application. 3. Tighten the hex head cap screw to the manufacturer's recommended torque specification using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening of titanium fasteners. | Always use a calibrated torque wrench and adhere to specified torque values to prevent thread stripping or material deformation. |
| Using incompatible lubricants or thread locking compounds. | Consult material compatibility charts to ensure lubricants and thread lockers do not react with or degrade titanium Grade 5. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||