This M19 x 94mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its lightweight, non-magnetic properties make it ideal for specialized fastening applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M19 |
| Length | 94mm |
| Head Width | 12mm |
Trusted by engineers across multiple sectors, this M19 x 94mm Nylon Hex Head Cap Screw (12mm head width) provides excellent dielectric strength and resistance to chemicals and corrosion. Manufactured from high-performance nylon, it offers a lower tensile strength than metal fasteners but excels in environments where conductivity, magnetism, or galvanic corrosion is a concern. Ideal for electrical enclosures, chemical processing equipment, and specialized instrumentation requiring non-metallic components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Manually thread the screw to confirm proper engagement. 3. Tighten using an appropriately sized wrench or socket, avoiding overtightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, leading to stripping of nylon threads or deformation of the head. | Use a torque wrench set to the manufacturer's recommended torque specification for nylon fasteners, or tighten until snug and apply an additional quarter turn. Avoid excessive force. |
| Using in applications requiring high tensile or shear strength beyond nylon's capabilities. | Verify the load requirements of the application. For high-strength structural connections, consider metal fasteners. Nylon screws are best suited for light-duty fastening, insulation, and corrosion-prone environments. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical Enclosure Assembly, Chemical Processing Equipment, Medical Device Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||