This M19 x 80mm Nylon Hex Head Cap Screw offers superior corrosion resistance and a lightweight design. Engineered for robust performance in challenging environments, it ensures reliable and secure fastening.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M19 |
| Length | 80mm |
| Head Width | 12mm |
Built to exacting engineering tolerances, this M19 x 80mm Nylon Hex Head Cap Screw features a 12mm head width. Crafted from high-strength nylon, it exhibits excellent dielectric properties, resistance to a wide range of chemicals and solvents, and a low coefficient of friction. Its inherent flexibility allows for some vibration dampening, making it ideal for applications where metal fasteners may corrode or create electrical conductivity issues. This screw is designed for applications requiring non-magnetic fastening and reduced weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Thread the Nylon Hex Head Cap Screw by hand to verify alignment and prevent cross-threading. 3. Tighten the screw to the required torque using an appropriately sized wrench, avoiding over-tightening which can damage the nylon. 4. Verify the connection is secure and the desired clamping force is achieved.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to stripping or cracking of the threads. | Use a torque wrench to apply the manufacturer-specified torque. Hand-tighten initially to ensure proper thread engagement. |
| Using in applications with extreme temperature fluctuations that exceed nylon's operating range. | Consult the nylon material specifications for the intended operating temperature range. Consider alternative materials for extreme temperature environments. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment, Medical device assemblies, Corrosion-prone marine environments, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||