Engineered for robust performance, this M19 x 128mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Ideal for lightweight assemblies and environments where traditional metal fasteners are unsuitable.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M19 |
| Length | 128mm |
| Head Width | 11mm |
Built to exacting engineering tolerances, this M19 x 128mm Hex Head Cap Screw is manufactured from high-performance nylon, offering superior tensile strength and chemical resistance compared to standard polymers. The M19 thread pitch ensures secure engagement with corresponding tapped holes or nuts, while the 128mm length provides ample grip for various assembly requirements. The 11mm hex head width is optimized for standard tooling, facilitating efficient installation. Its non-conductive nature makes it suitable for electrical insulation applications, and its lightweight composition reduces overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating component has a properly sized and tapped M19 thread. 2. Align the Nylon Hex Head Cap Screw with the threaded hole and gently thread it in by hand to prevent cross-threading. 3. Using a standard 11mm hex tool, tighten the screw to the required torque specification, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading due to improper alignment. | Always start threading the screw by hand to confirm correct engagement before applying tools. |
| Overtightening leading to nylon thread stripping or head damage. | Utilize a torque wrench and adhere to recommended torque values for nylon fasteners to avoid material failure. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment mounting, Corrosive chemical processing environments, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||