Engineered for extreme environments, this M18x84mm Grade 5 Titanium Hex Head Cap Screw offers superior strength-to-weight ratio and exceptional corrosion resistance, ensuring reliable fastening in critical industrial applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M18 |
| Length | 84mm |
| Head Width | 9mm |
A proven choice for industrial professionals, this M18x84mm Hex Head Cap Screw is manufactured from high-performance Titanium Grade 5 (Ti-6Al-4V). This aerospace-grade alloy provides an exceptional combination of tensile strength, fatigue resistance, and lightness, making it ideal for applications where weight reduction and robust performance are paramount. The M18 thread ensures significant load-bearing capacity, while the 84mm length offers ample engagement. The 9mm head width is optimized for standard tooling, facilitating efficient installation and disassembly in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply a small amount of anti-seize compound to the threads if recommended for the application. 3. Thread the cap screw into the receiving component by hand until snug. 4. Using a calibrated torque wrench, tighten the cap screw to the specified torque value for the M18 size and Titanium Grade 5 material, ensuring even pressure application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M18 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M18 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the titanium screw, leading to thread stripping or material fatigue. | Always adhere to the recommended torque specifications for Grade 5 Titanium, using a calibrated torque wrench. |
| Using incompatible lubricants or anti-seize compounds that can react with titanium. | Consult material compatibility charts and use only titanium-specific or recommended anti-seize compounds. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace and Aviation components, Marine and Offshore equipment, Medical implants and surgical instruments, High-performance automotive and motorsport, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||