This M18x80mm Nylon Hex Head Cap Screw offers superior chemical resistance and electrical insulation. Ideal for environments where corrosion and conductivity are critical concerns, ensuring reliable fastening.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M18 |
| Length | 80mm |
| Head Width | 34mm |
Designed for demanding industrial environments, this M18x80mm Nylon Hex Head Cap Screw features a robust nylon construction, providing excellent resistance to a wide range of chemicals, solvents, and corrosive agents. Its dielectric properties make it suitable for electrical applications, preventing short circuits and ensuring safety. The M18 thread size and 80mm length, coupled with a 34mm head width for ample torque application, offer secure and reliable joining for moderate load applications. This fastener is an excellent choice for automotive, electronics, chemical processing, and marine industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool (e.g., socket wrench) for the M18 hex head. 2. Align the screw with the pre-drilled or tapped hole. 3. Thread the screw by hand to ensure proper engagement and prevent cross-threading. 4. Tighten the screw to the recommended torque, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M18 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M18 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to stripping of threads or head deformation. | Use a torque wrench and adhere to the manufacturer's recommended torque specifications for nylon fasteners to prevent damage. |
| Using the wrong size tool, which can round the hex head and make removal difficult. | Ensure the correct size socket or wrench is used for the 34mm hex head to achieve proper grip and prevent damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Marine and offshore equipment, Chemical processing equipment, Automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||