Engineered for extreme environments, this M18x52mm Hex Head Cap Screw is forged from Aerospace Grade 5 Titanium. Offering exceptional strength, minimal weight, and unparalleled corrosion resistance, it ensures reliable fastening in critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M18 |
| Length | 52mm |
| Head Width | 34mm |
A high-performance industrial component, this M18x52mm Hex Head Cap Screw is precision-machined from Titanium Grade 5 (Ti-6Al-4V). This alloy offers a remarkable tensile strength of 950 MPa and a yield strength of 880 MPa, coupled with excellent fatigue resistance and a density approximately 45% that of steel. The substantial 34mm head width provides superior torque transfer and load distribution, making it ideal for high-stress assemblies where weight reduction and extreme durability are paramount. Its inherent biocompatibility and resistance to aggressive media make it suitable for diverse industrial sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces and threads of both the screw and the receiving component to remove any debris or contaminants. 2. Apply a suitable thread lubricant or anti-seize compound if specified by the application requirements. 3. Thread the M18x52mm Hex Head Cap Screw into the designated fastener hole, ensuring it engages smoothly and is not cross-threaded. 4. Tighten the screw to the manufacturer's specified torque value using a calibrated torque wrench, ensuring proper tension and secure fastening without over-stressing the component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M18 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M18 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or component damage. | Always use a calibrated torque wrench and adhere to the specified torque values for the application to prevent over-tightening. |
| Not cleaning mating surfaces, which can lead to uneven load distribution and premature fastener failure. | Thoroughly clean all threads and mating surfaces before installation to ensure proper seating and optimal performance. |
| Using incompatible thread lubricants or anti-seize compounds that can compromise the fastener's integrity or the assembly's performance. | Consult the application engineering specifications for recommended lubricants or anti-seize compounds compatible with Titanium Grade 5. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance automotive systems, Medical device manufacturing, Chemical processing equipment, Marine and offshore applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||