Engineered for demanding environments, this M18x119mm Hex Head Cap Screw is crafted from high-strength Titanium Grade 5. Its superior corrosion resistance and exceptional strength-to-weight ratio make it a reliable fastening solution.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M18 |
| Length | 119mm |
| Head Width | 30mm |
A proven choice for industrial professionals, this M18x119mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), offering an exceptional combination of high tensile strength (approximately 950 MPa) and low density. The 30mm head width ensures secure torque application. Its inherent biocompatibility and resistance to galvanic corrosion make it ideal for applications in harsh chemical, marine, aerospace, and medical sectors where component integrity is paramount. The precise dimensions and material properties guarantee reliable performance under extreme conditions and cyclic loading.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply appropriate lubricant if recommended for the specific application to prevent galling. 3. Tighten the cap screw to the specified torque using a calibrated torque wrench, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M18 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M18 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Galling of titanium threads during installation. | Use a high-quality anti-seize compound specifically designed for titanium, and tighten the fastener smoothly without excessive force or rapid rotation. |
| Over-torquing or under-torquing the fastener. | Always consult the relevant engineering specifications or torque charts for the specific application and use a calibrated torque wrench to achieve the correct tension. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine hardware, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||