This M18 x 76mm Nylon Hex Head Cap Screw offers excellent corrosion resistance and electrical insulation properties. Its lightweight design makes it suitable for various industrial and specialized applications where metal fasteners are unsuitable.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M18 |
| Length | 76mm |
| Head Width | 18mm |
Manufactured under strict quality controls, this M18 x 76mm Hex Head Cap Screw features a nominal diameter of M18 and a full length of 76mm. The head width is precisely machined to 18mm, ensuring compatibility with standard M18 tooling. Constructed from high-performance nylon, it exhibits superior resistance to a broad range of chemicals and solvents, and possesses excellent dielectric strength, making it ideal for electrical applications. Its inherent flexibility provides vibration dampening and reduces the risk of overtightening damage to delicate components. The material's low coefficient of friction also facilitates easier assembly and disassembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the cap screw into the designated fastener hole to prevent cross-threading. 3. Use a properly sized wrench or socket to tighten the hex head to the required torque, avoiding overtightening, especially with nylon components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M18 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M18 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to thread stripping or head deformation. | Utilize a torque wrench and adhere to recommended torque specifications for nylon fasteners to prevent damage. |
| Using a metal tool that is too large or too small for the hex head, causing damage to the head. | Confirm the correct size wrench or socket (18mm) is used for the hex head to ensure a snug fit and proper engagement. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panel mounting, Lightweight assembly in sensitive environments, Corrosion-prone or chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||