Engineered for robust performance, this M17x90mm Brass Hex Head Cap Screw offers superior corrosion resistance and non-magnetic properties. Ideal for demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Size | M17 |
| Length | 90mm |
| Head Width | 36mm |
Specified by design engineers worldwide, this M17x90mm Brass Hex Head Cap Screw is manufactured from high-grade brass, ensuring excellent corrosion resistance, inherent non-magnetic properties, and good electrical conductivity. The M17 thread specification guarantees precise mating with standard M17 nuts and tapped holes, while the 90mm length provides substantial grip. The 36mm hex head width allows for secure tightening with standard wrenches, making it suitable for applications where aesthetics and performance are critical, such as in marine hardware, electrical connections, architectural elements, and decorative fixtures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads of the tapped hole or nut are clean and free from debris. 2. Hand-thread the screw to verify alignment and prevent cross-threading. 3. Using an appropriately sized wrench on the 36mm hex head, tighten the screw to the required torque specification, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to stripped threads or fastener fatigue. | Always adhere to recommended torque values for brass fasteners, utilizing a torque wrench for accuracy. |
| Installing in environments requiring high tensile strength, where brass may not be suitable. | Verify the material's mechanical properties against the application's load requirements. Consider higher-strength alloys if necessary. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and terminals, Architectural and decorative installations, Plumbing and water systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||