Engineered for reliability, this M17x74mm Brass Hex Head Cap Screw provides superior corrosion resistance and non-sparking properties. Ideal for environments where chemical inertness is paramount.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Size | M17 |
| Length | 74mm |
| Head Width | 10mm |
A proven choice for industrial professionals, this M17x74mm Hex Head Cap Screw is manufactured from high-grade brass, renowned for its excellent corrosion resistance, moderate strength, and non-magnetic properties. The M17 metric thread ensures secure and precise fastening, while the 74mm length provides ample engagement. With a head width of 10mm, it is compatible with standard hex tools. This fastener is particularly well-suited for applications in marine environments, chemical processing equipment, electrical conductivity applications, and anywhere non-sparking characteristics are critical for safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to start, verifying proper alignment. 3. Tighten to the recommended torque specification using an appropriate hex driver.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, which can strip the brass threads or deform the component. | Adhere to the manufacturer's recommended torque specifications for brass fasteners. |
| Using the screw in a high-stress structural application where brass's lower tensile strength may be insufficient. | Verify the material's suitability for the load requirements; consider steel alloys for higher strength needs. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Chemical processing equipment, Electrical connectors and enclosures, Non-sparking tool applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||