Engineered for demanding environments, this M17x67mm Brass Hex Head Cap Screw provides exceptional corrosion resistance and reliable fastening. Its robust design ensures long-term performance in challenging conditions.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M17 |
| Length | 67mm |
| Head Width | 25mm |
Purpose-built for heavy-duty applications, this M17x67mm Hex Head Cap Screw is manufactured from high-grade brass, offering superior resistance to corrosion, especially in marine, chemical, and high-humidity environments. The M17 metric thread ensures compatibility with standard M17 nuts and tapped holes, while the 67mm length provides ample engagement for secure joint assembly. The 25mm head width is optimized for torque application using standard 25mm wrenches or sockets, facilitating efficient installation and removal. This screw's inherent non-sparking properties also make it suitable for hazardous locations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate torque wrench and socket size (25mm). 2. Ensure mating threads are clean and free from debris. 3. Hand-thread screw to engage threads before applying torque. 4. Apply torque to the specified value for the application to ensure a secure joint without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread stripping or fastener deformation. | Always adhere to recommended torque specifications and use a calibrated torque wrench for accurate tightening. |
| Cross-threading the screw during installation. | Carefully align the screw with the mating threads and hand-thread for at least two full turns before using a tool. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and grounding, Architectural fixtures and decorative elements, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||