This M17x28mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Its lightweight, non-conductive properties make it ideal for harsh environments and sensitive applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M17 |
| Length | 28mm |
| Head Width | 29mm |
Built to exacting engineering tolerances, this M17x28mm Hex Head Cap Screw is fabricated from high-performance Nylon. This material provides superior dielectric strength, excellent chemical resistance against many solvents and acids, and a lightweight alternative to metal fasteners. The M17 metric thread ensures secure engagement, while the 28mm length and 29mm head width provide ample bearing surface and torque application. Ideal for applications requiring non-magnetic properties, vibration dampening, or protection against galvanic corrosion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating thread is clean and free of debris. 2. Align the Hex Head Cap Screw with the receiving hole and begin threading by hand to prevent cross-threading. 3. Tighten using a standard hex drive socket or wrench, applying consistent torque until the desired pre-load is achieved. Avoid overtightening, which can strip the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening Nylon fasteners. | Use a torque wrench and adhere to recommended torque values for Nylon to prevent stripping or damaging the threads. |
| Using in environments with high UV exposure without protection. | Consider UV-stabilized Nylon variants or apply protective coatings if prolonged outdoor exposure is expected. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation assemblies, Chemical processing equipment, Marine and water treatment systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||