This M17x26mm Hex Head Cap Screw, forged from robust carbon steel, offers superior tensile strength and torque resistance. Engineered for secure and dependable fastening in demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Size | M17 |
| Length | 26mm |
| Head Width | 10mm |
Manufactured under strict quality controls, this M17x26mm hex head cap screw is crafted from high-grade carbon steel, ensuring exceptional tensile strength and shear resistance. The M17 nominal diameter, coupled with a 26mm length and a 10mm head width (across flats), provides substantial load-bearing capacity and secure tightening capabilities. Its inherent material properties make it ideal for applications requiring robust mechanical joints and resistance to vibration and shock loads, conforming to industry standards for reliable performance in construction, machinery, and automotive assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate wrench size (10mm) to engage hex head. 2. Insert screw into pre-drilled and tapped hole or through mating components. 3. Tighten screw to the specified torque value for the application, ensuring a secure and stable joint.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to cam-out and potential head damage. | Always use a 10mm wrench or socket that fits snugly onto the hex head for optimal torque transfer. |
| Over-tightening, which can strip threads or exceed the material's yield strength. | Refer to engineering specifications or torque charts for the correct tightening torque relevant to the application and mating materials. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Structural steel connections, Heavy machinery assembly, Automotive chassis and engine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||