This M17x24mm Hex Head Cap Screw, crafted from high-performance polycarbonate, offers exceptional strength-to-weight ratio and superior chemical resistance. Its non-conductive properties make it ideal for sensitive environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M17 |
| Length | 24mm |
| Head Width | 12mm |
Trusted by engineers across multiple sectors, this M17x24mm Hex Head Cap Screw is manufactured from robust polycarbonate, offering excellent impact resistance and a wide operating temperature range. The M17 thread size provides secure fastening, while the 24mm length and 12mm head width ensure compatibility with standard tooling and assembly processes. Polycarbonate's inherent dielectric strength makes this fastener suitable for electrical enclosures and components where conductivity is a concern. Its lightweight nature also contributes to reduced overall assembly weight without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the screw into the receiving component until snug. 3. Tighten using a suitable wrench or socket until the desired torque is achieved, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to cracking or stripping. | Use a torque wrench and consult recommended torque values for polycarbonate fasteners to ensure proper tension without damage. |
| Using the screw in applications exceeding its temperature or chemical resistance limits. | Verify the environmental conditions of the application against the specified operating parameters of polycarbonate. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment, Medical devices, Automotive interior components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||