Engineered from aerospace-grade Titanium Grade 5, this M17x24mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for demanding environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M17 |
| Length | 24mm |
| Head Width | 11mm |
Manufactured under strict quality controls, this M17x24mm hex head cap screw is forged from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent tensile strength, fatigue resistance, and biocompatibility. The 11mm head width ensures compatibility with standard tooling for secure installation. Its inherent resistance to galvanic corrosion makes it suitable for saltwater environments, while its low density minimizes weight in critical applications such as aerospace structures, medical implants, and high-performance automotive components. Compliance with relevant industry standards ensures consistent performance and reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure threads are clean and free of debris. 2. Apply a suitable anti-seize compound if required by the application. 3. Tighten to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or fastener fatigue. | Always adhere to the recommended torque specifications for Titanium Grade 5 fasteners. |
| Using incorrect tools, which can damage the head or threads. | Utilize the correct size and type of wrench or socket to match the 11mm hex head. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||