This M17x19mm brass hex head cap screw offers superior corrosion resistance and a lustrous aesthetic. Engineered for reliable fastening in demanding environments, it combines strength with visual appeal.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Size | M17 |
| Length | 19mm |
| Head Width | 20mm |
Precision-manufactured to tight tolerances, this M17x19mm brass hex head cap screw ensures optimal fit and performance. Constructed from high-grade brass, it exhibits excellent resistance to corrosion and tarnishing, making it ideal for marine, architectural, and decorative applications where both durability and appearance are critical. The M17 thread size, coupled with a 19mm length and a 20mm hex head width, provides secure clamping force suitable for joining components in environments exposed to moisture or corrosive agents. Its non-magnetic properties also lend themselves to specific electronic or scientific assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 20mm hex head. 2. Thread the M17 screw into the pre-tapped hole or through the aligned components. 3. Tighten to the desired torque, ensuring a secure connection without over-stressing the brass material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force when tightening, which can strip the brass threads. | Apply firm, consistent torque. Consult torque charts for brass fasteners if precise values are required. |
| Exposing brass fasteners to aggressive chemicals that can cause etching or degradation. | Verify chemical compatibility before use in specific industrial or laboratory settings. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Decorative architectural elements, Electrical and electronic enclosures, Horticultural equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||