Engineered for extreme environments, this M17x148mm Titanium Grade 5 hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical fastening.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M17 |
| Length | 148mm |
| Head Width | 11mm |
Purpose-built for heavy-duty applications, this M17x148mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), a high-performance alloy renowned for its excellent tensile strength (up to 950 MPa), fatigue resistance, and exceptional corrosion immunity, particularly in aggressive chemical and saline environments. The M17 thread size ensures robust load-bearing capacity, while the 148mm length provides ample reach for thicker material assemblies. The 11mm hex head width is optimized for standard tooling, facilitating secure and efficient installation. This fastener is ideal for aerospace structures, high-performance automotive components, marine hardware, and industrial equipment subjected to significant stress and corrosive conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant to threads if required by application. 3. Engage the cap screw by hand until snug, then use a calibrated torque wrench to tighten to the specified torque value for M17 Grade 5 titanium. 4. Verify proper seating and alignment of the fastened components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening with excessive force | Always use a calibrated torque wrench and adhere to recommended torque specifications for titanium fasteners to prevent thread stripping or component damage. |
| Using incompatible tooling or improper socket size | Utilize the correct size hex socket (11mm) to ensure full engagement and prevent cam-out or rounding of the hex head. |
| Failure to clean mating surfaces | Thoroughly clean both the screw threads and the internal threads of the mating component to ensure proper engagement and achieve the intended clamping force. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance marine hardware, Critical automotive assemblies, Medical implants and equipment, Corrosive industrial processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||