Engineered from aerospace-grade Titanium Grade 5, this M17x146mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M17 |
| Length | 146mm |
| Head Width | 15mm |
Precision-manufactured to tight tolerances, this M17x146mm hex head cap screw is forged from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent mechanical properties including high tensile strength (up to 950 MPa) and fatigue resistance. The M17 thread provides robust load-bearing capability, while the 146mm length ensures ample grip in substantial assemblies. Its inherent biocompatibility and excellent corrosion resistance make it suitable for challenging chemical and biological environments. The 15mm hex head allows for secure torque application with standard tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply a suitable lubricant or anti-seize compound to the threads if recommended for the application. 3. Engage the screw by hand to prevent cross-threading, then tighten using an appropriate hex wrench or socket to the specified torque value.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the fastener | Always start engaging the screw by hand to ensure proper alignment before applying torque. |
| Over-torquing the fastener | Consult torque charts for Titanium Grade 5 fasteners of this size and material, and use a calibrated torque wrench. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, Medical implants and instrumentation, High-performance automotive assemblies, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||