This M17x12mm Hex Cap Screw, manufactured from high-strength Aluminum 6061, offers an optimal balance of lightweight construction and robust performance. Its corrosion resistance makes it ideal for demanding environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M17 |
| Length | 12mm |
| Head Width | 13mm |
Specified by design engineers worldwide, this Hex Head Cap Screw is precision-machined from Aluminum 6061 alloy, renowned for its excellent strength-to-weight ratio and superior corrosion resistance. The M17 nominal size ensures compatibility with standard metric tooling and tapped holes. With a critical length of 12mm and a head width of 13mm, this fastener provides secure and reliable joining for a wide array of applications, particularly where weight reduction and environmental durability are paramount, such as in aerospace assemblies, marine hardware, and high-performance automotive components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the screw to confirm alignment and prevent cross-threading. 3. Tighten using a calibrated torque wrench to the specified torque value for Aluminum 6061, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, which can strip threads in aluminum. | Always consult engineering specifications for the correct torque range and use a calibrated torque wrench. |
| Failure to properly clean mating threads, leading to binding or incomplete seating. | Thoroughly clean both the screw threads and the tapped hole before assembly. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and fittings, Automotive lightweighting initiatives.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||