High-strength M17x12mm hex head cap screw crafted from premium Aluminum 6061. Offers exceptional corrosion resistance and a lightweight profile, ensuring secure and durable fastening in demanding environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M17 |
| Length | 12mm |
| Head Width | 29mm |
Engineered for reliability and performance, this M17x12mm hex head cap screw is manufactured from Aluminum 6061, a widely used alloy known for its excellent strength-to-weight ratio and superior corrosion resistance, particularly in marine and atmospheric environments. The nominal diameter is M17, with a precise length of 12mm. The robust hex head measures a width of 29mm, providing ample surface area for torque application with standard tooling. This fastener is ideal for applications where weight reduction is critical without compromising structural integrity, such as in aerospace components, automotive assemblies, and marine hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Align the M17 hex head cap screw with the pre-drilled or tapped hole. 3. Tighten the screw using an appropriate wrench, applying controlled torque to the 29mm head until secure, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque on Aluminum 6061, which can lead to thread stripping or deformation. | Refer to torque specifications for Aluminum 6061 fasteners of this size and thread pitch, or use a torque wrench for precise application. |
| Incompatible mating materials that may cause galvanic corrosion with Aluminum 6061. | When joining Aluminum 6061 to dissimilar metals, consider using insulating washers or coatings to mitigate galvanic corrosion risks. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and fittings, Lightweight automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||