This M17x120mm hex head cap screw, forged from robust carbon steel, offers superior tensile strength and shear resistance. Its precisely machined hex head ensures optimal torque transfer for secure and dependable assembly in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M17 |
| Length | 120mm |
| Head Width | 22mm |
Manufactured under strict quality controls, this M17x170mm hex head cap screw boasts a nominal diameter of M17, a total length of 120mm, and a head width of 22mm. Constructed from high-grade carbon steel, it exhibits excellent tensile strength and hardness, making it ideal for applications requiring substantial load-bearing capacity. The metric thread profile ensures compatibility with standard metric nuts and tapped holes. Its plain finish offers a base for further coating if required and provides good resistance to moderate corrosive environments. This fastener is designed for applications subject to significant mechanical stress and vibration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 22mm hex head. 2. Ensure the mating threads are clean and free from debris. 3. Thread the cap screw into the receiving component until hand-tight, then apply the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can strip threads or fracture the fastener. | Always use a calibrated torque wrench and adhere to the recommended torque specifications for the application. |
| Using an improperly sized wrench, leading to head damage and difficulty in achieving proper torque. | Utilize a wrench or socket that precisely fits the 22mm hex head to ensure secure engagement and prevent slippage. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Structural steel fabrication, Heavy machinery assembly, Automotive chassis and engine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||