This M17x117mm Hex Head Cap Screw, crafted from high-strength Aluminum 6061, offers exceptional corrosion resistance and a superior strength-to-weight ratio for demanding applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M17 |
| Length | 117mm |
| Head Width | 35mm |
Engineered for reliability and performance, this M17x117mm Hex Head Cap Screw is manufactured from premium Aluminum 6061, a heat-treatable alloy known for its excellent corrosion resistance and formability. The M17 nominal diameter, coupled with a 117mm length and a 35mm head width, ensures robust fastening capabilities. This material is ideal for environments where weight reduction and resistance to environmental degradation are paramount, commonly found in aerospace structures, marine hardware, and automotive components requiring efficient load distribution and long-term durability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the screw into the receiving component to confirm alignment and prevent cross-threading. 3. Apply torque using an appropriate wrench or socket, adhering to recommended torque specifications for Aluminum 6061 to avoid stripping or over-stressing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the screw, which can strip the threads or fracture the fastener due to Aluminum 6061's lower yield strength compared to steel. | Consult torque charts specific to Aluminum 6061 fasteners and use a calibrated torque wrench to achieve the recommended torque value. |
| Using the wrong tool size, leading to damaged hex head corners and difficulty in achieving proper torque. | Always use a correctly sized, high-quality hex socket or wrench that fully engages the hex head. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and fittings, Automotive sub-assembly and trim.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||