Engineered for superior strength-to-weight ratio, this M17x117mm Hex Cap Screw is crafted from high-performance Aluminum 6061. Ideal for applications demanding corrosion resistance and reduced mass.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Size | M17 |
| Length | 117mm |
| Head Width | 23mm |
Manufactured under strict quality controls, this M17x117mm Hex Head Cap Screw utilizes Aluminum 6061, renowned for its excellent corrosion resistance, weldability, and moderate strength. The material's superior fatigue strength and good machinability make it suitable for a wide range of environmental conditions. With a head width of 23mm, it provides ample bearing surface for torque distribution, minimizing the risk of material deformation. This fastener meets stringent industry standards, ensuring reliable performance in aerospace, automotive, and marine environments where weight reduction is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean threaded hole and screw threads to ensure optimal engagement. 2. Apply appropriate lubricant if specified for the application to prevent galling and achieve correct torque values. 3. Tighten the screw using a calibrated torque wrench to the specified torque setting, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, leading to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Aluminum 6061. |
| Using the wrong tool, potentially damaging the hex head or the mating surface. | Employ a correctly sized hex socket or wrench that fits snugly to avoid cam-out and ensure proper torque application. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and interior assemblies, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||