Engineered for superior performance, this M17x108mm Grade 5 Titanium Hex Cap Screw offers exceptional strength-to-weight ratio and robust corrosion resistance for critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M17 |
| Length | 108mm |
| Head Width | 25mm |
Specified by design engineers worldwide, this M17x108mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), a leading alpha-beta alloy renowned for its excellent mechanical properties and biocompatibility. With a nominal diameter of M17, a length of 108mm, and a head width of 25mm, it provides robust fastening capabilities. Grade 5 titanium exhibits a tensile strength of approximately 895 MPa and a yield strength of 827 MPa, coupled with outstanding resistance to aggressive environments and extreme temperatures, making it indispensable in aerospace, medical implants, marine hardware, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of contaminants. 2. Apply a suitable thread lubricant or anti-seize compound to the threads if specified by design. 3. Tighten the screw to the torque value specified in the engineering design documents using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening beyond design torque | Always use a calibrated torque wrench and adhere strictly to the specified torque values to prevent thread stripping or material fatigue. |
| Using incompatible lubricants or thread locking compounds | Consult the material compatibility charts for Titanium Grade 5 before applying any lubricants or thread locking compounds to avoid potential galvanic corrosion or material degradation. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine hardware, Chemical processing and oil & gas equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||