This M17 x 105mm brass hex cap screw offers superior corrosion resistance and excellent conductivity. Its robust design ensures reliable fastening in demanding environments, making it a prime choice for critical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M17 |
| Length | 105mm |
| Head Width | 11mm |
Precision-manufactured to tight tolerances, this M17 x 105mm brass hex cap screw features a head width of 11mm, ensuring secure engagement with standard tooling. Constructed from high-grade brass (commonly UNS C36000 or similar), it exhibits exceptional resistance to galvanic corrosion, making it ideal for marine, electrical, and plumbing installations where moisture and aggressive media are present. The material's inherent non-magnetic properties also make it suitable for sensitive electronic assemblies. Its ductility allows for some deformation without fracture, contributing to its reliability under moderate stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean threads of both the screw and the mating hole to ensure smooth insertion and prevent galling. 2. Thread the screw into the tapped hole or nut by hand for the initial few turns to confirm proper alignment and avoid cross-threading. 3. Tighten the screw to the required torque specification using an appropriately sized wrench or socket on the hex head. Avoid overtightening, which can damage the brass material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force which can strip threads or deform the brass. | Always adhere to torque specifications and use appropriate tools. Brass is softer than steel and requires careful handling. |
| Installing in environments requiring high shear or tensile strength, where brass may not be suitable. | Assess the load requirements of your application. For high-strength applications, consider stainless steel or alloy steel fasteners. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical grounding and bonding components, Plumbing fixtures and pipe connections.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||