Engineered for robust environments, this M17x104mm Nylon Hex Head Cap Screw offers exceptional chemical resistance and electrical insulation. Ideal for applications demanding non-conductive and lightweight fastening solutions.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M17 |
| Length | 104mm |
| Head Width | 12mm |
Purpose-built for heavy-duty applications, this M17x104mm Nylon Hex Head Cap Screw features a precisely manufactured hex head with a 12mm width for secure tool engagement. Constructed from high-performance nylon, it exhibits superior resistance to a broad spectrum of chemicals, oils, and solvents, making it suitable for corrosive or demanding operational environments. Its dielectric properties provide excellent electrical insulation, crucial for sensitive electronic assemblies or where grounding is undesirable. The M17 thread pitch and 104mm length ensure robust mechanical fastening capabilities, capable of withstanding significant tensile and shear loads within its design parameters.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating components are clean and free from debris. 2. Hand-thread the M17x104mm Nylon Hex Head Cap Screw into the receiving hole until snug. 3. Using an appropriate wrench for the 12mm hex head, tighten the screw to the specified torque, avoiding overtightening which can damage the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to material deformation or stripping. | Use a torque wrench to adhere to recommended torque specifications for nylon fasteners. Avoid excessive force. |
| Using the screw in applications exceeding its temperature or chemical resistance limits. | Consult the nylon material datasheet to confirm suitability for the operating temperature range and the specific chemicals present in the application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical Enclosures & Assemblies, Chemical Processing Equipment, Aerospace & Automotive Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||