This M17 x 88mm hex head cap screw is manufactured from premium 304 stainless steel, offering superior corrosion resistance and high tensile strength for robust fastening solutions.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M17 |
| Length | 88mm |
| Head Width | 8mm |
Built to exacting engineering tolerances, this M17 x 88mm hex head cap screw is constructed from 304 stainless steel, a widely used austenitic alloy renowned for its excellent corrosion resistance, particularly against atmospheric conditions and many corrosive chemicals. The material's inherent strength and durability make it suitable for environments where rust and degradation are concerns. The precise M17 thread specification ensures reliable mating with standard M17 nuts and tapped holes, while the 88mm length provides ample engagement for secure connections. The 8mm head width facilitates torque application with standard tooling, ensuring optimal load distribution and structural integrity in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threaded component (nut or tapped hole) is clean and free from debris. 2. Insert the hex head cap screw through the components to be joined. 3. Thread the screw by hand to confirm alignment and prevent cross-threading, then tighten to the required torque specification using an appropriate wrench or socket.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force leading to thread stripping or fastener breakage. | Always refer to torque charts for the specific application and material, and use a calibrated torque wrench. |
| Failure to properly clean mating threads, leading to difficult assembly or compromised joint strength. | Thoroughly inspect and clean both the screw threads and the mating threads before assembly. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine environments and outdoor equipment, Chemical processing plants, Food and beverage industry equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||