Engineered for superior performance, this M17 x 65mm polycarbonate hex head cap screw offers exceptional strength and chemical resistance. Its lightweight, impact-absorbent design makes it ideal for specialized fastening needs.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M17 |
| Length | 65mm |
| Head Width | 18mm |
Manufactured under strict quality controls, this M17 x 65mm hex head cap screw features a nominal diameter of M17, a length of 65mm, and a head width of 18mm. Constructed from high-performance polycarbonate, it exhibits excellent tensile strength, superior impact resistance, and good electrical insulation properties. The material's inherent resistance to many chemicals and solvents makes it suitable for corrosive environments where metal fasteners may degrade. Its non-magnetic nature also provides advantages in sensitive electronic or magnetic field applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Thread the M17 x 65mm polycarbonate hex head cap screw into the receiving component by hand for the initial few turns to prevent cross-threading. 3. Tighten to the specified torque using an appropriately sized hex socket wrench, taking care not to overtighten and exceed the material's load limits.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the polycarbonate screw, leading to thread stripping or cracking. | Adhere to the recommended torque specifications for polycarbonate fasteners to avoid overstressing the material. |
| Using the screw in applications exceeding its chemical or temperature resistance limits. | Verify that the intended application environment falls within the known resistance parameters of polycarbonate materials. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical equipment enclosures, Medical device assembly, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||