Engineered for reliable performance, this M17 x 58mm Nylon Hex Head Cap Screw provides superior corrosion resistance and electrical insulation. Ideal for environments where metal fasteners are unsuitable.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M17 |
| Length | 58mm |
| Head Width | 14mm |
A proven choice for industrial professionals, this M17 x 58mm Nylon Hex Head Cap Screw is constructed from high-performance nylon, offering excellent resistance to a broad spectrum of chemicals, solvents, and moisture. Its non-conductive properties make it ideal for electrical or electronic assemblies. The M17 thread size ensures robust fastening capabilities, while the 58mm length provides ample grip for various joint thicknesses. The 14mm head width allows for secure torque application with standard tooling. This screw is designed for applications requiring lightweight, non-corrosive, and electrically insulating fastening solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Insert the nylon hex head cap screw into the pre-drilled hole or mating thread. 3. Tighten the screw using an appropriate wrench or socket, applying consistent torque until secure. Avoid over-tightening to prevent stripping or damage to the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to stripping of threads or cracking of the head. | Use a torque wrench set to the manufacturer's recommended torque specification for nylon fasteners. Hand-tighten and then apply a final quarter-turn if a torque wrench is unavailable, being mindful of resistance. |
| Using the screw in applications exceeding its temperature or load-bearing limits. | Consult the nylon material's datasheet for its operational temperature range and tensile strength. Select fasteners appropriate for the specific environmental and mechanical demands of the application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosure assemblies, Chemical processing equipment, Corrosive environment applications, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||