This M17 x 58mm Hex Head Cap Screw, manufactured from high-strength Aluminum 6061, offers an optimal balance of lightweight design and robust performance. It is engineered for secure fastening in demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M17 |
| Length | 58mm |
| Head Width | 31mm |
Trusted by engineers across multiple sectors, this M17 x 58mm Hex Head Cap Screw is precision-machined from Aluminum 6061, renowned for its excellent corrosion resistance, good weldability, and moderate to high strength. The M17 nominal diameter, coupled with a 58mm length and a substantial 31mm head width, provides significant bearing surface and torque transfer capability. This makes it ideal for applications requiring reliable joining in aerospace, automotive, and marine industries where weight reduction and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the screw to prevent cross-threading. 3. Tighten using a calibrated torque wrench to the manufacturer's specified torque value for Aluminum 6061 fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, which can strip threads or damage the aluminum material. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Aluminum 6061. |
| Using the wrong size or type of tool, leading to head damage or improper seating. | Utilize a properly sized hex socket or wrench that fits snugly to ensure maximum contact and prevent slippage. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and body assemblies, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||