This M17 x 55mm Nylon Hex Head Cap Screw provides exceptional corrosion resistance and non-conductive properties. Its robust nylon construction ensures reliable performance in harsh environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M17 |
| Length | 55mm |
| Head Width | 29mm |
Trusted by engineers across multiple sectors, this M17 x 55mm Hex Head Cap Screw is manufactured from high-performance nylon, offering excellent dielectric strength, resistance to a wide range of chemicals, and a lightweight profile. The M17 metric thread size ensures compatibility with standard tooling, while the 55mm length and 29mm head width provide ample bearing surface and torque application. Its non-magnetic properties make it suitable for sensitive electronic assemblies and medical equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M17 metric tool for the hex head. 2. Engage the tool securely with the hex socket. 3. Apply consistent torque until the desired clamping force is achieved, avoiding over-tightening. 4. Ensure the mating components are properly aligned before fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can lead to stripping or cracking. | Use a torque wrench to apply the manufacturer-recommended torque value for nylon fasteners. |
| Using the wrong size tool, leading to cam-out and damage to the hex head. | Always verify the tool size matches the M17 hex head specification. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Marine and offshore installations, Electrical enclosures and systems, Medical device assembly, Corrosive industrial environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||