This M17 x 32mm Hex Head Cap Screw, crafted from premium 304 stainless steel, offers superior corrosion resistance and robust mechanical strength for critical fastening applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Size | M17 |
| Length | 32mm |
| Head Width | 19mm |
Manufactured under strict quality controls, this M17 Hex Head Cap Screw features a precise 32mm length and a 19mm head width. Constructed from high-grade 304 stainless steel, it provides excellent resistance to corrosion, pitting, and crevice corrosion in a wide range of environments, including marine and chemical processing. The material's inherent toughness ensures reliable performance under significant tensile and shear loads, making it suitable for demanding industrial assemblies requiring long-term durability and structural integrity. Its hex drive allows for high torque application, ensuring a secure and stable joint.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the M19 hex head. 2. Thread the screw into the pre-tapped hole or through the assembled components. 3. Tighten the screw to the required torque specification, ensuring a secure and stable fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material deformation. | Use a torque wrench to apply the manufacturer's recommended torque specification for the fastener and material. |
| Using the incorrect size wrench, which can damage the hex head and compromise torque application. | Ensure the wrench or socket fits snugly on the hex head to allow for proper engagement and torque transfer. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and shipbuilding, Chemical processing equipment, Food processing machinery, General industrial construction and assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||