Engineered for reliability, this M17 x 13mm Brass Hex Head Cap Screw offers exceptional corrosion resistance. Its robust design ensures secure fastening in diverse environments, making it a preferred choice for critical applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M17 |
| Length | 13mm |
| Head Width | 26mm |
Trusted by engineers across multiple sectors, this M17 x 13mm Hex Head Cap Screw is manufactured from high-grade brass, renowned for its inherent corrosion resistance and excellent electrical conductivity. The M17 thread size provides substantial load-bearing capacity, while the 13mm length is suitable for joining components with limited material overlap. The 26mm head width ensures adequate surface area for wrench engagement, facilitating secure installation and torque application. Brass's non-sparking properties also make it suitable for hazardous environments. Ideal for marine, electrical, and decorative applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the cap screw to confirm proper alignment and engagement. 3. Tighten using an appropriate wrench or socket to the recommended torque specification for brass fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening brass fasteners, which can lead to thread stripping or material deformation. | Utilize a torque wrench and consult fastener torque charts specific to brass and thread size to ensure proper tension without overstressing the material. |
| Using the wrong size wrench or socket on the hex head, potentially damaging the head or leading to slippage. | Always use a wrench or socket that precisely fits the 26mm head width to ensure secure engagement and efficient torque transfer. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Electrical connectors and busbars, Marine hardware and fittings, Decorative metalwork and architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||