Engineered for superior corrosion resistance and aesthetic appeal, this M17 x 135mm brass hex head cap screw offers excellent machinability. Ideal for demanding applications where durability and appearance are critical.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Size | M17 |
| Length | 135mm |
| Head Width | 10mm |
Specified by design engineers worldwide, this M17 x 135mm brass hex head cap screw features a nominal diameter of M17, an overall length of 135mm, and a head width of 10mm. Manufactured from solid brass (typically UNS C26000 or C36000), it provides excellent resistance to atmospheric and water corrosion, making it suitable for marine, electrical, and decorative applications. The inherent non-magnetic properties and good electrical conductivity of brass are further advantages. This screw conforms to relevant ISO or DIN standards for metric fasteners, ensuring interchangeability and reliable performance in critical assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to confirm engagement and avoid cross-threading. 3. Tighten using an appropriate wrench or socket to the specified torque, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening brass fasteners, which can lead to thread stripping or deformation. | Utilize a torque wrench set to the manufacturer's recommended torque specification for the specific brass alloy and thread size. |
| Using brass screws in high-stress structural applications where steel or stainless steel is recommended. | Select fastener materials based on load-bearing requirements, environmental exposure, and potential for galvanic corrosion. Brass is not suitable for primary structural integrity. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Electrical connectors and busbars, Marine hardware and fittings, Decorative architectural elements, Plumbing and water systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||