This M17 x 132mm hex head cap screw, crafted from robust carbon steel, offers exceptional tensile strength and durability. Engineered for secure fastening in demanding environments, ensuring long-lasting performance.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Size | M17 |
| Length | 132mm |
| Head Width | 11mm |
Engineered for reliability and performance, this M17 x 132mm hex head cap screw is manufactured from high-grade carbon steel, providing superior tensile and shear strength. The 11mm head width ensures adequate torque transfer for secure assembly. This material choice offers excellent resistance to fatigue and deformation under load, making it suitable for critical structural connections, heavy machinery assembly, and industrial equipment where vibration and stress are prevalent. Its precise dimensions guarantee consistent fit and performance in pre-tapped holes or with mating nuts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from obstructions. 2. Insert the cap screw through the components to be joined. 3. Tighten the cap screw using an appropriately sized wrench or socket until the specified torque is achieved.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the cap screw, leading to thread stripping or material deformation. | Always refer to torque specifications for the specific application and material being fastened. Use a calibrated torque wrench. |
| Using a cap screw that is too short, resulting in insufficient thread engagement. | Select a cap screw length that allows for at least 1.5 to 2 full turns of thread engagement with the mating component or nut. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Heavy-duty structural assemblies, Machinery and equipment manufacturing, Industrial plant construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||