This M17 x 112mm Nylon Hex Head Cap Screw offers superior corrosion resistance and lightweight performance. Ideal for applications requiring non-conductive, low-friction fastening with excellent impact strength.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M17 |
| Length | 112mm |
| Head Width | 13mm |
Manufactured under strict quality controls, this M17 x 112mm Hex Head Cap Screw is constructed from high-performance Nylon, offering exceptional dielectric strength, chemical resistance, and a low coefficient of friction. The M17 thread size combined with a 112mm length and a 13mm head width ensures secure fastening in a variety of assemblies. Its inherent toughness provides excellent impact and vibration resistance, making it suitable for demanding environments where traditional metal fasteners may degrade or interfere with electrical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the M17 Nylon Hex Head Cap Screw into the receiving component until snug. 3. Tighten using an appropriate wrench or socket, applying torque gradually to avoid over-stressing the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can lead to thread stripping or head deformation. | Apply torque incrementally and use a torque wrench set to the recommended specification for nylon fasteners. |
| Using in applications exceeding the temperature or load-bearing capacity of nylon. | Consult material specifications for maximum temperature and tensile strength limits before deployment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment, Corrosive chemical processing environments, Medical device assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||