Engineered for superior corrosion resistance and high tensile strength, this M16x94mm 316 stainless steel hex head cap screw is your go-to solution for severe industrial applications. Reliable performance in harsh conditions.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M16 |
| Length | 94mm |
| Head Width | 21mm |
Designed for demanding industrial environments, this M16x94mm hex head cap screw is precision-manufactured from premium 316 stainless steel, renowned for its exceptional resistance to pitting, crevice corrosion, and general corrosion in aggressive media, including chlorides and acids. The M16 nominal diameter, 94mm length, and 21mm head width ensure robust load-bearing capacity and secure fastening. This material composition makes it ideal for marine hardware, chemical processing equipment, food and beverage production, and pharmaceutical manufacturing where hygiene and environmental resilience are paramount. Its inherent strength and durability minimize risk of failure under stress and in corrosive atmospheres.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant if recommended for the specific application to prevent galling, especially with stainless steel. 3. Tighten the hex head cap screw to the manufacturer's recommended torque specification using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to stripped hex head. | Always use the correct size metric wrench (21mm in this case) to ensure proper engagement and prevent damage to the fastener head. |
| Overtightening, which can lead to thread damage or fastener failure. | Adhere to specified torque values. If unsure, consult engineering drawings or industry standards for guidance. |
| Cross-threading the fastener during installation. | Carefully start the screw by hand for several turns to ensure it's engaging the threads correctly before applying any torque. |
A: This Hex Head Cap Screw, 316 Stainless Steel is manufactured from 316 Stainless Steel.
A: Marine and offshore equipment, Chemical processing plants, Food and beverage processing machinery, Pharmaceutical manufacturing, Coastal infrastructure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||