This M16x88mm Hex Head Cap Screw, crafted from high-strength Aluminum 6061, offers superior corrosion resistance and a lightweight profile. Ideal for demanding environments where performance and durability are paramount.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M16 |
| Length | 88mm |
| Head Width | 30mm |
Manufactured under strict quality controls, this M16x88mm Hex Head Cap Screw features a robust Aluminum 6061 composition, renowned for its excellent strength-to-weight ratio and inherent corrosion resistance. The M16 nominal diameter, combined with an 88mm length and a 30mm hex head width, ensures secure and reliable fastening in a wide array of structural and mechanical assemblies. Aluminum 6061's machinability and anodizing capabilities further enhance its suitability for applications requiring both aesthetic appeal and functional longevity. Its low density makes it an optimal choice for weight-sensitive designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Thread the cap screw into the pre-tapped hole or nut by hand to prevent cross-threading. 3. Tighten the cap screw using an appropriate wrench or socket to the recommended torque specification for Aluminum 6061, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the screw by forcing it into the hole. | Always start threading by hand to ensure proper alignment before applying any torque. |
| Over-tightening the screw, which can strip threads or damage the aluminum material. | Refer to recommended torque charts for Aluminum 6061 fasteners of this size and material to prevent over-stressing. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace components, Automotive assemblies, Marine hardware, Lightweight structural framing, Electrical enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||