This M16x77mm Hex Head Cap Screw, crafted from high-strength Titanium Grade 5, offers exceptional corrosion resistance and superior strength-to-weight ratio for critical fastening needs.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M16 |
| Length | 77mm |
| Head Width | 9mm |
Engineered for reliability and performance, this M16x77mm Titanium Grade 5 Hex Head Cap Screw boasts a nominal diameter of 16mm and a length of 77mm, with a head width of 9mm. Titanium Grade 5 (Ti-6Al-4V) offers a tensile strength of approximately 950 MPa and excellent resistance to corrosion in various environments, including saltwater and aggressive chemicals. Its low density makes it ideal for weight-sensitive applications without compromising structural integrity. This makes it suitable for aerospace, marine, medical implants, and high-performance automotive components where durability and lightweight design are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Apply a suitable lubricant or anti-seize compound if recommended for the specific application. 3. Thread the cap screw by hand to confirm proper engagement and prevent cross-threading. 4. Tighten the cap screw to the specified torque using an appropriate hex wrench or socket, adhering to manufacturer guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can lead to thread stripping or material fatigue. | Always use a torque wrench and consult material-specific torque charts for accurate tightening. |
| Using incompatible tools, potentially damaging the hex head or the tool. | Utilize a high-quality hex wrench or socket that precisely matches the head dimensions. |
| Not cleaning the mating threads before installation, leading to increased friction and inaccurate torque readings. | Thoroughly clean both the screw and the receiving threads prior to assembly. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and subsea equipment, Medical implants and surgical instruments, High-performance automotive and motorsport, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||