Engineered for exceptional performance, this M16 x 62mm Hex Head Cap Screw is crafted from aerospace-grade Titanium Grade 5. Offering superior strength-to-weight ratio and outstanding corrosion resistance for critical industrial applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M16 |
| Length | 62mm |
| Head Width | 26mm |
A proven choice for industrial professionals, this M16 x 62mm Hex Head Cap Screw utilizes Titanium Grade 5 (Ti-6Al-4V), renowned for its exceptional tensile strength, fatigue resistance, and low density. The M16 thread provides robust load-bearing capabilities, while the 62mm length ensures ample engagement in various assemblies. The 26mm hex head width allows for secure torquing with standard tooling, making it suitable for demanding environments such as aerospace, marine engineering, chemical processing, and high-performance automotive applications where corrosion and weight are critical factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply appropriate thread lubricant if specified for the application to achieve proper torque. 3. Tighten the cap screw using a calibrated torque wrench to the manufacturer's recommended torque specification for the M16 size and mating material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the fastener, leading to thread stripping or fastener failure. | Always use a calibrated torque wrench and adhere to recommended torque values for Titanium Grade 5 fasteners. |
| Using the wrong size wrench, which can damage the hex head and prevent proper tightening. | Verify the wrench size matches the 26mm head width of the cap screw. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and systems, Chemical processing equipment, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||