This M16x30mm Hex Head Cap Screw, crafted from premium Titanium Grade 5, offers exceptional strength and corrosion resistance for demanding industrial environments. Its superior performance makes it a critical component in high-stress applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M16 |
| Length | 30mm |
| Head Width | 11mm |
A high-performance industrial component, this M16x30mm Hex Head Cap Screw is engineered from Titanium Grade 5 (Ti-6Al-4V), renowned for its outstanding tensile strength, fatigue resistance, and lightweight properties. With a nominal diameter of M16 and a length of 30mm, its precisely machined hex head features a 11mm width, ensuring optimal torque transfer with standard tooling. This material's inherent biocompatibility and resistance to galvanic corrosion make it suitable for critical applications across aerospace, medical implants, marine hardware, and chemical processing industries where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply appropriate thread lubricant or anti-seize compound if specified for the application. 3. Tighten the screw to the manufacturer's recommended torque specification using a calibrated torque wrench. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or fastener fatigue. | Always use a calibrated torque wrench and adhere to recommended torque values for the specific application and material. |
| Cross-threading the fastener, damaging both the screw and the mating component. | Carefully align the screw with the threads and start tightening by hand for several turns before using a tool. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine and offshore equipment, High-performance automotive and motorsport applications, Chemical processing and petrochemical industries.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||