Engineered for robust fastening in corrosive environments, this M16x23mm hex head cap screw is manufactured from premium 304 stainless steel. It offers superior strength and corrosion resistance for critical applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Size | M16 |
| Length | 23mm |
| Head Width | 31mm |
Trusted by engineers across multiple sectors, this M16x23mm hex head cap screw boasts exceptional durability and corrosion resistance owing to its 304 stainless steel composition. The alloy provides excellent tensile strength and resistance to pitting and crevice corrosion, making it suitable for marine, chemical processing, and food-grade environments. Its M16 thread size ensures a secure and reliable connection, while the 23mm length and 31mm head width provide ample bearing surface and torque capability for demanding assemblies. Compliance with relevant industry standards for dimensional accuracy and material integrity is assured.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating thread and tool are clean and free of debris. 2. Insert the cap screw into the pre-drilled and tapped hole. 3. Tighten using an appropriately sized wrench or socket to the specified torque value, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a damaged or undersized tool, leading to stripped heads or improper torque application. | Utilize a properly fitting, high-quality tool for consistent torque and to prevent damage to the hex head. |
| Applying excessive torque, which can lead to thread stripping or fastener failure. | Adhere to the recommended torque specifications for the application to ensure secure fastening without compromising the screw's integrity. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and equipment, Chemical processing plant construction, Food and beverage processing machinery, Outdoor structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||